Frame Relay was developed to solve communication problems that other protocols could not: the increased need for higher speeds, an increased need for large bandwidth efficiency, particularly for clumping ("bursty" traffic), an increase in intelligent network devices that lower protocol processing, and the need to connect LANs and WANs. Like X.25, Frame Relay is a packet-switched protocol. But the Frame-Relay process is streamlined. There are significant differences that make Frame Relay a faster, more efficient form of networking. A Frame-Relay network doesn't perform error detection, which results in a considerably smaller amount of overhead and faster processing than X.25. Frame Relay is also protocol independent-it accepts data from many different protocols. This data is encapsulated by the Frame-Relay equipment, not the network.

'Today's LANs and computing equipment have the potential to run at much higher speeds and transfer very large quantities of data. With the diversity and complexity of today's networks, management can be a mammoth task if you don't have the proper tools. Each environment is a unique combination of equipment from different vendors. Frame Relay uses a packet-switching technology, similar to X.25, but is more efficient. As a result, it can make your networking quicker, simpler, and less costly.

Frame Relay sends information in packets called frames through a shared Frame-Relay network. Each frame contains all the information necessary to route it to the correct destination. So in effect, each endpoint can communicate with many destinations over one access link to the network. And instead of being allocated a fixed amount of bandwidth, Frame-Relay services offer a CIR (committed information rate) at which data is transmitted. But if traffic and your service agreement allow, data can burst above your committed rate. Since Frame Relay has a low overhead, it's a perfect fit for today's complex networks. You get several clear benefits: First, multiple logical connections can be sent over a single physical connection, reducing your internetworking costs. By reducing the amount of processing required, you get improved performance and response time. And because Frame Relay uses a simple link layer protocol, your equipment usually requires only software changes or simple hardware modifications, so you don't

The t1 line rates is a digital transmission service that can be used for carrying voice and/or data. A T1 connection is sometimes referred to as a "dedicated service" as the service is delivered to and from the customer premise from the CO (Central Office) without combining it with other traffic. A T1 connections is established by providing a "loop" or wire from the users premesis to the CO where the service provider has equipment. Part of the cost of a T1 is the "loop charge" or the monthly rental fee for the wire that is rented from the local phone company. Once the connection reaches the CO it can access the carriers network and reach any destination.

T-1 provides high speed, point-to-point digital transmission line (up to 1.544 Mbps). This can be used as a single high-speed data channel or it can be split into 24 channels and allocated to either voice or data applications. It is widely deployed and readily available in most regions and although the service is not deminished by distance from the CO, the price is sensitive to distance. This is due to the rental of the loop from the LEC (Local Exchante Carrier). T1 is currently the most common way that large companies connect their LAN to the rest of the world.

Are you ready for T1 service? You may be ready if you have critcal services that need a reliable connection to the internet. If you run ASP services, host e-mail servers or web servers, have over 20 people accessing the internet or use video on demand you should consider T1 access. While more expensive that DSL, T1 access is made to support the above applications. Also remember that when you begin shopping for T1 service you should partner with someone who will act as your agent and represent your best interests. Consider using a broker or agent to help you with your search and cut through some of the industry lingo to help you get exactly what you need.